Causes and avoidance of glass partition cracks in Jinan. The distance between laminated glass can make your home very beautiful, but everything can't be flawless. The beautiful back also has many defects. For example, wall plastering between laminated glass always shows cracks and weak equipment. So what are the reasons for the cracks in the spacing display, and how should the community owners avoid this kind of phenomenon? Let's take you to master all the basic knowledge.

濟南玻璃隔斷出現裂縫的原因，口上方的一小塊混凝土加氣塊，放在兩塊板設備后面，隔墻板兩側的粘結砂漿被混凝土加氣塊碰掉，使板縫間的抹灰砂漿不圓，批膩子時容易在這里產生裂縫。

The cause of cracks in Jinan glass partition is that a small concrete aerated block above the opening is placed behind the two plate equipment, and the bonding mortar on both sides of the partition plate is knocked off by the concrete aerated block, so that the plastering mortar between the plate joints is not round, and cracks are easy to occur here when applying putty.

由于批膩子底層不整平，使灰塵薄厚不勻稱，薄厚不一樣很大時，在砂漿枯燥乏味硬底化的系統進程中，則發病不等量的減少，隨后展現縫隙。由于規劃方案不周到或工程施工順序機構過失，批量膩子后，管道穿過墻壁打孔，墻面因強烈沖擊振動而出現不規則裂縫。

Because the putty bottom layer is not leveled, the dust thickness is uneven, and the thickness is very different. In the systematic process of boring and hard bottom of mortar, the incidence of unequal reduction, and then show cracks. Due to the thoughtfulness of the planning scheme or the negligence of the engineering construction sequence organization, after batch putty, the pipeline passes through the wall to punch holes, and irregular cracks appear on the wall due to strong impact and vibration.

濟南玻璃隔斷避免裂紋的方法，即夾層玻璃之間的距離非常簡單，所以在設備和維護的系統過程中，要特別注意距離的維護。準確應用清理間距材料，避諱一些高 強 度、強酸強堿浸蝕液針對夾層玻璃表面的傷害。

The method to avoid cracks in Jinan glass partition, that is, the distance between laminated glass is very simple, so special attention should be paid to the maintenance of distance in the process of equipment and maintenance system. Clean the spacing materials accurately, and avoid the damage of some high-strength, strong acid and strong alkali etching solution to the surface of laminated glass.

在設備系統的過程中，嚴禁隨意搖晃和重器尖銳物體碰撞，防止夾層玻璃滑落。夾層玻璃之間的間隔應消 除易燃物塊，并確保間隔表面的定期清潔，使您的間隔展現整齊shu適的氣體。

In the process of equipment system, it is strictly prohibited to shake at will and collide with sharp objects of heavy equipment to prevent the laminated glass from sliding. The interval between laminated glass should eliminate inflammable blocks and ensure that the surface of the interval is cleaned regularly to make your interval show neat Shu and suitable gas.

為了防止間隔出現裂紋，歸根結底還是要從數據質量入手，選擇質量可靠的數據，能幫你省下不少時間，一起，多注意數據的清潔養護，然后玻璃間隔才能長期使用下去。

In order to prevent cracks in the interval, in the final analysis, we should start with the data quality. Selecting reliable data can help you save a lot of time. Together, pay more attention to the cleaning and maintenance of the data, and then the glass interval can be used for a long time.