1. Use banana water

香蕉水是用來油漆的一種工業用劑，很容易就買到，一般賣油漆的地方就有賣香蕉水的。清潔感應門門扇上的玻璃膠時，用干抹布沾上一些香蕉水，對著有玻璃膠的地方擦拭，玻璃膠就可以很快被了。

Banana water is an industrial agent used to remove paint. It is easy to buy. Generally, banana water is sold where paint is sold. When cleaning the glass glue on the door leaf of the induction door, dip some banana water with a dry rag and wipe it against the place with glass glue. The glass glue can be removed quickly.

2、用工業酒精

2. Industrial alcohol

工業酒精是一種常見的自動門玻璃膠用品，時，只需要沾上一點，再頑固的玻璃膠就能很快被掉。不過要注意的，一定要是工業酒精，醫用酒精的效果比工業酒精相差太遠。

Industrial alcohol is a common product for removing the glass glue of automatic door. When removing, it only needs to be stained with a little, and then the stubborn glass glue can be removed quickly. However, it should be noted that it must be industrial alcohol. The removal effect of medical alcohol is far from that of industrial alcohol.

3、用洗甲水

3. Use nail washing water

如果工業酒精和香蕉水都不好找，大家也可以用洗甲水來代替，普通的可以洗掉指甲油的就可以。洗甲水也是一種可以祛除自動感應門門扇上玻璃膠的好物品。

If industrial alcohol and banana water are not easy to find, you can also replace the nail polish with ordinary nail polish. Nail washing water is also a good article that can remove the glass glue on the door leaf of automatic induction door.

4、用護手霜

4. Hand Cream

護手霜是油脂類物質，它與玻璃膠類物質不相容，利用護手霜同樣可以輕松祛除自動門門扇上的玻璃膠。具體操作方法：將護手霜擠一些在玻璃膠上面，慢慢地用大拇指搓，一會就能將感應門門扇上的玻璃殘膠干凈了。

Hand cream is a kind of grease material, which is incompatible with glass glue. The use of hand cream can also easily remove the glass glue on the automatic door leaf. Specific operation method: squeeze some hand cream on the glass glue, slowly rub it with your thumb, and the residual glass glue on the door leaf of the induction door can be removed in a moment.

其實電動感應門所選用的玻璃并不是普通的玻璃，而是鋼化玻璃。鋼化玻璃屬于玻璃，它是一種預應力玻璃。是人們為了提高玻璃的強度而使用化學或物理的方法，在玻璃表面形成壓應力，這樣以來當玻璃承受外力時，就會抵消其表層的應力，從而大大提高了承載能力，增強玻璃自身的抗風壓性、寒暑性、沖擊性等性能。所以應注意應使用正確方法對玻璃進行清潔。

In fact, the glass selected for the electric induction door is not ordinary glass, but tempered glass. Tempered glass belongs to safety glass, which is a kind of prestressed glass. In order to improve the strength of glass, people use chemical or physical methods to form compressive stress on the glass surface. In this way, when the glass bears external force, it will first offset the stress on its surface, so as to greatly improve the bearing capacity and enhance the wind pressure resistance, heat and cold resistance, impact and other properties of the glass itself. Therefore, it should be noted that the correct method should be used to clean the glass.

我們一直在堅持分享的路上濟南感應門http://m.mlzqjgx.cn真正為您您所需要的問題.

We have been insisting on sharing http://m.mlzqjgx.cn Truly solve the problems you need