The installation of movable glass partition is, of course, inseparable from the partition pulley and frame of good quality. If these two kinds of accessories are not selected well, they can not be used for a longer time, and will also affect the service life of the glass partition. Therefore, it still needs some tips to select the partition pulley and frame.

玻璃隔斷一般面積大，重量大，因此邊框要用結實的鋁鈦合金，只有這種合金才能保證隔斷邊框的經久耐用。隔斷上精密的部件，就要屬于位于隔斷上或者下端的滑輪了。

The glass partition generally has a large area and heavy weight, so the frame should be made of solid aluminum titanium alloy. Only this alloy can ensure the durability of the partition frame. The precise components on the partition should belong to the pulley located at the upper or lower end of the partition.

一般上滑輪只起到導向和滾動作用，因此要確保上隔斷滑輪與滑軌緊密結合，隔斷才能滑動平穩、不擺動?？梢苿?dòng)隔斷的下滑輪也叫底輪，要有很好的承重作用。升級之前活動隔斷的滑輪在面板的一側，如果用這種隔斷來分割空間，就顯得不夠美觀。建議選擇那些滑輪在面板正上方隔斷。

Generally, the upper pulley only plays the role of guidance and rolling. Therefore, it is necessary to ensure that the upper partition pulley is closely combined with the slide rail, so that the partition can slide smoothly and not swing. The lower pulley of the movable partition is also called the bottom pulley, which should have a good load-bearing effect. Before upgrading, the pulley of the movable partition is on one side of the panel. If this partition is used to divide the space, it is not beautiful enough. It is recommended to select those pulleys to partition directly above the panel.

當隔斷滑動到一定位置時，碰到物體會自動停下來。在隔斷邊和隔斷之間的搭接處，要用特制的毛刷阻擋灰塵，還可以防止隔斷與墻之間的長期碰撞而導致?lián)p壞。在玻璃和金屬框結合部位好要裝上橡膠條，這樣能保護玻璃不會因?yàn)檎駝?dòng)而開裂。從細節處著手，才能保證品質。

When the partition slides to a certain position, it will automatically stop when it touches an object. At the overlap between the partition edge and the partition, a special brush shall be used to block dust, which can also prevent damage caused by long-term collision between the partition and the wall. Rubber strips shall be installed at the joint of glass and metal frame, so as to protect the glass from cracking due to vibration. Only by starting from the details can we ensure the quality.